ANALOG VIDEO DISTRIBUTION AMPLIFIER1:4 COMPOSITE VIDEO SPLITTER
MB-CVS421 is a 1 x 4, high-performance composite video amplifier designed for distributing composite video signals to multiple destinations. Composite video input is connected via a high-quality BNC connector. This amplifier then buffers, re-clocks and re-conditions the signal prior to distributing the composite signal output through up to 4 ports simultaneously. The MB-CVS421 consumes a fraction of the energy compared to typical consumer and broadcast units. Power draw is less than 350mW and less than 12mA @ 28V. It can be powered by any DC power source ranging from 8 volts all the way up to 70 volts. Designed specifically for aviation environments, the MB-CVS421 is constructed using a lightweight, powder-coated aluminum enclosure. All materials, including the BNC connectors, are compliant and pass UL-94V0 meeting FAA flammability requirements. The MB-CVS421 is designed to DO-160G standards and is covered under a 3 year limited, Standard Warranty.
|1 x 4 Composite video distribution amplifier that accepts one composite video signal on a high-quality BNC connector and outputs 4 composite video signals. Designed to DO-160 standards.
|1 Composite Video, 1Vpp typical, 2.3Vpp max AC Coupled with Sync Tip Clamp Compatible with negative synch signal Compatible with +/- biased signal 75-ohm impedance and termination BNC high-quality gold-plated edge mount
|4 high-quality BNC gold plated edge mount connectors 1Vpp typical, 2.3Vpp max All outputs fully buffered 75ohm impedance Output current 75mA each
|Silicon-based low-pass filters, ideal for baseband analog video, such as RS170 composite, NTSC or PAL. 6th-Order 9.5 Mhz –2dB Butterworth -1dB Passband Bandwidth at 8.2 Mhz 54dB Attenuation at 27Mhz (Upon Request can optionally be configured for pass-through, 150Mhz –3dB Bandwidth operation)
|Less than 350mW , less than 12mA @ 28V
|8 TO 70V
|UP TO 80V PER DO-160 AND 600V SPIKE PER DO-160
|SIGNAL TO NOISE RATIO
|Designed for –40°C (-40° F) to +85°C (+185°F)
|Designed for –60°C (-76°F) to +150°C (+302F)
|Active silicon-based signal re-drivers and conditioning
|ESD W/ CONNECTORS ON
|ESD CONNECTORS OFF
|6kV HBM, 300V MM, 2kV CDM
|Powder Coated 5052 Aircraft Aluminum
|DIMENSIONS (L x W x H)
|5.035 x 2.744 x .950
|6.4 oz. , with supplied brackets and hardware 7.2 oz.
|SHIPPED WITH UNIT
|Mating power connector, (2) mounting angles and hardware
|3 Year Limited Standard Warranty